For PVC and wood, a neutral-cure silicone is suitable. This type of silicone does not release any corrosive by-products and is therefore safe to use with PVC and wood. It also has good adhesion and flexibility, making it a suitable choice for sealing and bonding applications involving these materials. Additionally, it is resistant to weathering and UV exposure, making it a durable option for outdoor use. **

To remove the wood color from PVC, you can use a few different methods. One option is to sand the PVC surface with fine-grit sandpaper to remove the color. Another method is to use a chemical solvent or paint stripper specifically designed to remove paint or stains from PVC. You can also try using a mixture of bleach and water to lighten or remove the wood color from the PVC surface. It's important to test any method on a small, inconspicuous area first to ensure it does not damage the PVC. **

To remove the wood color from PVC, you can use a few different methods. One option is to sand the PVC surface with fine-grit sandpaper to remove the color. Another method is to use a chemical solvent or paint stripper specifically designed to remove paint or color from PVC. It is important to follow the manufacturer's instructions carefully and wear protective gear when using these chemicals. Additionally, you can also consider painting over the wood color with a primer and then painting it with a new color to completely cover the wood color. **

The solid wood panel is 1 inch thick. **

The thickness of a wood fiber board for plastering can vary depending on the specific application and the desired finish. In general, a wood fiber board for plastering should be at least 1/2 inch thick to provide a solid and stable surface for the plaster. However, for certain applications or to achieve a specific look, a thicker board may be necessary. It is important to consult with a professional to determine the appropriate thickness for your specific project. **

The load at which a 14 cm thick spruce wood breaks depends on various factors such as the density of the wood, the moisture content, and any defects present in the wood. Generally, spruce wood has a high strength-to-weight ratio and is commonly used in construction and furniture making. However, the specific load at which it would break would need to be determined through testing and analysis, as it can vary based on the specific characteristics of the wood. It is important to consult with a professional engineer or wood specialist to accurately determine the breaking load for a specific piece of spruce wood. **

Yes, PVC can be laid over old PVC as long as the existing PVC surface is clean, smooth, and in good condition. It is important to ensure that the old PVC is securely attached to the subfloor and free of any damage or imperfections that could affect the new installation. Proper preparation, such as cleaning and leveling the old PVC surface, is essential to ensure a successful installation of the new PVC flooring. Additionally, using an appropriate adhesive or underlayment may be necessary to ensure the new PVC flooring adheres properly to the old PVC surface. **

To lay PVC on PVC, you can use PVC cement or adhesive to bond the two pieces together. First, make sure the surfaces are clean and free of any debris. Then, apply the PVC cement to both surfaces and press them together firmly. Allow the adhesive to set and cure according to the manufacturer's instructions before putting any stress on the joint. It's important to follow proper safety precautions and use the appropriate adhesive for the type of PVC you are working with. **